Catch Your Chance Mac OS

Posted on  by
  1. Catch Your Chance Mac Os Catalina
  2. Catch Your Chance Mac Os 11
  3. Catch Your Chance Mac Os X
  4. Catch Your Chance Mac Os Download

Running the Mac OS X maintenance scripts

Mac® OS X is a UNIX®-based system, built in part on both BSD® and FreeBSD®. UNIX systems run scheduled maintenance routines — known as maintenance scripts — to clean up a variety of System logs and temporary files. By default, these are executed between 03:15 and 05:30 hours local time, depending on the script.

If your Mac is shut down or in sleep mode during these hours, the maintenance scripts will not run. [1] This results in log files that will grow over time, consuming free space on your Mac OS X startup disk.

To check your settings, go to 'Safari' in your menu bar and select 'Preferences,' or you could just use the Command-, keyboard shortcut to go right there. In the 'General' tab, you'll see three possible culprits for your problems: New windows open with New tabs open with. After 14,000 words and many hours creating the biggest Macintosh games list out there, all I can ask you is to get your first Mac game and bookmark this page (you will need the inspiration later). Mac gaming can only grow if more gamers give it a shot.

If your Mac is shut down or left in sleep mode overnight, the maintenance scripts should be run manually on a regular basis… unless you plan on devoting a large portion of your hard drive to the files cleaned-up by these routines!

This FAQ, derived from our book Troubleshooting Mac OS X, provides:

  • Procedures for manually running the maintenance scripts.
  • Determining when the maintenance scripts last ran.
  • The maintenance performed by the scripts.
  • How the scripts are launched on a schedule.

More information about maintaining Mac OS X can be found in our 'Maintaining Mac OS X' FAQ.

Manually running the maintenance scripts

The easy way

Download and install a third-party utility, such as Cocktail or Yasu, that provides a function for running the maintenance scripts. You may find additional solutions by searching MacUpdate or VersionTracker™. Employ the version of the utility that is compatible with to the version of Mac OS X you are using.

These utilities permit running any individual maintenance script — daily, weekly, or monthly — or all of them. For example, running all three scripts weekly is a good habit if your Mac is frequently shutdown or in sleep mode overnight.

While we have not tested it, we have read positive reports from users of the freeware application Anacron. It runs the maintenance scripts automatically if the computer is awake and the scripts have not run when scheduled. As with other utilities, employ the version of Anacron that is compatible with the version of Mac OS X you are using..

The Terminal way

Using your Admin account, you can run all three maintenance scripts at once:

  1. Open Terminal, located in the Macintosh HD > Applications > Utilities folder.
  2. At the Terminal prompt, type the following, exactly as written:
  3. Press Return.
  4. Type your Admin password when prompted, then press Return.

All three scripts will run in sequence. There is no visual feedback while the scripts execute. You will know they are completed when the Terminal prompt returns.

You can also run the scripts individually. For example, to run just the daily script, you would type the the following command in step 2:

  • sudo periodic daily

Determining when the maintenance scripts last ran

You can run a Terminal command to quickly check the date and time stamps of the log files associated with each maintenance script. This indicates when the scripts' logs were last updated, hence when the scripts were last executed.

  1. Open Terminal, located in the Macintosh HD > Applications > Utilities folder.
  2. At the Terminal prompt, type the following, exactly as written:
    1. ls -al /var/log/*.out
  3. Press Return.

Catch Your Chance Mac Os Catalina

You will see output similar to the following:

-rw-r--r-- 1 root wheel 467984 8 May 10:40 /var/log/daily.out

-rw-r--r-- 1 root wheel 1258 8 May 10:43 /var/log/monthly.out

-rw-r--r-- 1 root wheel 198378 8 May 10:43 /var/log/weekly.out

In this example, the scripts last ran on 8 May of the current year, between 10:40 and 10:43 local time. The date and time stamps in the example are the result of running the scripts manually via Terminal. If the scripts were run automatically on their default schedule, their date stamps would vary and their time stamps would indicate executions between 03:15 and 05:30 hours.

The maintenance performed by the scripts

Each maintenance script — daily, weekly, and monthly — has a specific function. Their functions have varied over different versions of Mac OS X.

  • The daily script removes old log files, 'scratch' and 'junk' files, backs-up the NetInfo database (Mac OS X 10.4 Tiger® and earlier), reports a variety of system and network statistics, and rotates the system.log file. Under Tiger, the daily script also cleans up scratch fax files and prunes asl.log, the log file for the then-new Apple System Logging facility. Under Mac OS X 10.5 Leopard®, the daily script also prunes the asl.db file that replaced the asl.log file for Apple System Logging.
  • The output from the daily script is written to the /var/log/daily.out file, which can be viewed in Console.
  • By default, the daily script is scheduled to run daily at 03:15 hours local time.
  • The weekly script rebuilds the locate and whatis databases. Depending on the version of Mac OS X, it also rotates the following log files: ftp.log, lookupd.log, lpr.log, mail.log, netinfo.log, ipfw.log, ppp.log, and secure.log
  • The output from the weekly script is written to the /var/log/weekly.out file, which can be viewed in Console.
  • By default, the weekly script is scheduled to run every Saturday at a specific time. Under Tiger and later, it runs at 03:15 hours local time. Under Mac OS X 10.3 Panther® and Mac OS X 10.2 Jaguar it runs at 04:30 hours local time.
  • The monthly script reports per-user usage accounting and rotates — depending on the version of Mac OS X — the wtmp, install.log, and cu.modem.log files.
  • The output from the monthly script is written to the /var/log/monthly.out file, which can be viewed in Console.
  • By default, the monthly script is scheduled to run on the first of the month at 05:30 hours local time.

How the scripts are launched on a schedule

How the schedule for each script is specified depends on the version of Mac OS X.

Scheduling under Panther and Jaguar

Under Panther and Jaguar, the schedule is specified in the System crontab file. You can easily view or edit this file with the donationware utility Cronnix. The cron process launches the scripts based on the schedule specified in crontab.

Scheduling under later versions of Mac OS X

Introduced in Tiger, the launchd process invokes each script on a schedule specified in a script-specific property list (.plist file) in the /System/Library/LaunchDaemons directory. The specific property list for each script is as follows:

  • daily script: com.apple.periodic-daily.plist
  • weekly script: com.apple.periodic-weekly.plist
  • monthly script: com.apple.periodic-monthly.plist

Additional information about launchd can be found in the Apple Developer Connection document System Startup Programming Topics.

How the timer used by launchd handles sleep time has led many to incorrectly believe that they no longer need to run the maintenance scripts and that the scripts are run automatically if the Mac was asleep or shutdown at the scheduled time.

While it may appear that launchd executes the maintenance scripts 'on the fly' if the computer is asleep or shutdown at the appointed time, this is a side effect of how the timer treats the time the computer has spent in sleep mode. The timer used by launchd does not count sleep time. If your Mac is asleep at the scheduled time when a given script is supposed to run, the script may run later that day at a time shifted by the amount of time the Mac was asleep. However, if you restart your Mac before the time-shifted execution time, pending events are lost and the script will not run off-schedule: the next chance for the script to run will be at its regularly scheduled time.

If you regularly restart your Mac and the computer regularly sleeps or is shut down at the scheduled times, it's possible that the scripts will never run, hence one should still run them manually, such as on a weekly basis.

Catch Your Chance Mac Os 11

Catalina

The sleep time shift is also cumulative. For example, if you don't restart your Mac for weeks or months at a time, but let it sleep when not in use, this can result in:

  • The daily script running once every few days or never.
  • The weekly script running once every few weeks or never.
  • The monthly script running once every few months or never.

The time shift in each case is the total amount of time the Mac has spent in sleep since its last restart. If you have a process that writes heavily to the logs, you can end up devoting good hard disk space to the log files.

Catch Your Chance Mac Os X

Related links

  • Maintaining Mac OS X.

Notes

Catch Your Chance Mac Os Download

[1] If you log out from your Mac OS X system and leave it with the Login Window displayed, your Mac can still enter sleep mode. When left at the Login Window, your Mac will enter sleep mode based on the settings specified by the last Admin user in System Preferences > Energy Saver. Therefore, if you want to leave your Mac with the Login Window displayed and still have the nightly Mac OS X maintenance routines run automatically, an Admin user must set System Sleep to Never in the System Preferences > Energy Saver > Sleep tab.